|
NATURE GUARD
Cement/Fiber Roofing Products
10AM - THURSDAY - APRIL 6
Preview 10-4, Wednesday, April 5
11500 Reading Road, Red Bluff, CA
Advance Bid Auction Catalog (222 kb)
Past Auction - held in 2000
|
|
FLAKER
|
- 1995 KLOCKNER type KHZ/Z ring flaker, TOSHIBA 200 hp, s/n: 16438/95
|
|
FORMERS
|
- (3) BISON VD-B2 120 formers w/(2) spreader heads, 48"x120' feed thru caul plate belt conveyor, mat leveling brushes, 10' x 8-1/2' overs belt conveyor, accommodates 52" x 130" platens
|
|
PRE PRESS
|
- PATHEX hydraulic pre press w/60" x 134" platen, 5'x13' feed thru belt conveyor, 15 hp hydraulic unit, 2,000mm platen strokes, 3,800mm platen opening, 900 N/EM2 spec pressure
|
|
PRESS
|
- BISON 2,600 ton, 4 ram hydraulic platen press, 86" x 9' platen, 1,000 psi force across platen, 100 hp hydraulic pump, (52 caul plate/8.66 square cap.)
|
|
HARDENING CHAMBER
|
- AMERICAN 30'x120' 3-track hot oil heated hardening chamber, w/45"x300' caul plate rollcases, (12) circulation fans. 160o F to 170o F temperature setting
|
|
DRYER
|
- 1989 DORNIER 8-tray 17-section natural gas zone controlled dryer, w/8-tray dryer load & unloaders, load and unload elevators, (5) 20 hp burner fans, (4) 7-1/2 hp air circulation fans, SCHENCK electrics, ECLIPSE burners, 230o F temperature setting
|
|
TRIM SAW
|
- 1994 SCHWABEDISSEN DA79/S trim saw, s/n: 9406047
|
|
PAINT LINE
|
- INFRATROL paint line consisting of 2-strand transfer feeding thru infrared preheat oven, COATES tank w/BLACK BROTHERS squeegee roll, air knives, (2) infrared drying ovens, (2) hot oil heated ovens, (2) cooling zones w/ambient air cooler, misting zone
|
|
VACUUM STACKER/VACUUM TRANSFERS
|
- BISON 2-station carriage type vacuum stacker w/(10) vacuum cups per station in 40" x 9' rectangle pattern, 5 hp carriage lift & transfer drives, 2 hp vacuum pump
- (2) BISON single station carriage type vacuum stackers w/(10) vacuum cups in 40" x 9' rectangle pattern, 5 hp carriage lift and transfer drives, 2 hp vacuum pump
- BISON 2-station carriage type vacuum lift caul plate transfer w/drives & pump
- BISON 2 station rotating type vacuum lift caul plate transfer w/motor & pump
|
|
TRANSFORMERS
|
- G.E. 2000 KVA, class OA, 12000 to 4804/277 volt 3 phase transformer, s/n: L243287
- WESTINGHOUSE 1500 KVA, class OA, 12000 to 4808/277 volt 3 phase transformer, s/n: 9812A40
- (3) FEDERAL PACIFIC 15 KVA, 240 X 480 TO 120/240 volt single phase transformers
- (6) ACME 5 KVA 240 x 480 to 120/240 volt single phase transformers
|
|
SWITCHBOARDS
|
- SQUARE D 2500 amp 480 volt rated breaker panel w/ (2) 800 amp, (1) 400 amp breakers
- SQUARE D 2500 amp 480 volt rated breaker panel w/(1) 600 amp, (2) 500 amp, (4) 400 amp breakers
- G.E. AV line 800 amp metered switchboard w/800 amp main, 3 asst breakers
- RSE SIERRA 3000 amp 480 volt rated breaker panel w/3000 amp main, (2) 600 amp, (3) 400 amp, (6) asst breakers
|
|
MOTOR CONTROL CENTERS
|
- ALLEN BRADLEY centerline 8-section 93-station MCC w/smart motor controller, starters, breakers
- ALLEN BRADLEY centerline 7-section 62-station MCC w/smart motor controller, starters, breakers
- ALLEN BRADLEY centerline 3-section 23-station MCC w/smart motor controller, starters, breakers
- ALLEN BRADLEY 4-section, 16-station MCC w/smart motor controller, starters, breakers
- ALLEN BRADLEY 2-section, 16-station MCC w/smart motor controller starters, breakers
- ALLEN BRADLEY 4-section, 37-station MCC w/smart motor controller, starters, breakers
- ALLEN BRADLEY 2-section, 11-station MCC w/smart motor contoller starters, breakers
- ALLEN BRADLEY 9-section, 30-station MCC w/505 series, SMC series adjustable frequency motor controllers
- ALLEN BRADLEY 10-section, 31-station MCC w/520E series, SMC series, adjustable frequency starters
- ALLEN BRADLEY centerline 4-section 28-station MCC
- (2) ALLEN BRADLEY 22-station SMC starter cabinets
- SIEMENS 18-section 160-station double sided MCC
- G.E. AV line 2-section 4-station pump house MCC
- ALLEN BRADLEY 4-section 14-station MCC w/520E series starter
- PLUS: ALLEN BRADLEY size 6 smart motor control reduced voltage starter, ALLEN BRADLEY remote station PLC cabinets, quantity of ALLEN BRADLEY, SEW MOVITRAC, GRASEBY, RELIANCE adjustable frequency AC motor controllers, power conduit & wire
|
|
FORKLIFTS
|
- HYSTER H110XL, 10,000 lb capacity dual pneumatic forklift w/159" lift, open view mast, sideshift, monotrol pedal, propane, s/n: GC05D03979R
- WHITE MY50B 5,000 lb pneumatic forklift, w/sideshift, propane, s/n: 6400456
|
|
AIR COMPRESSORS
|
- QUINCY model OSB50ANA312, 50 hp rotary screw air compressor, s/n: 97058
- QUINCY 30 hp rotary screw air compressor
- 4'x10' vertical air receiver tank
|
|
BOILER
|
- 1994 KONUS ENERGY SYSTEMS KV 1/25 natural gas fired, oil heating package boiler. 150 PSIG max operating pressure, 554o F maximum operating temperature, 4mm BTU/hr, 432 sq ft heating surface, 352 GPM nominal flow rate, 25 hp fan, 250, 500 gallon oil tanks
- 20' x 21' x 20' all steel bolt together boiler building
- CHIP PROCESSING
- KOCKUMS 7' x 7' 3-deck chip shaker screen
- 5' x 20" 2-deck shaker screen
- DURAFLOW 6"x18", 75 hp rotary lobe blowers w/silencers
- (2) DURAFLOW 6"x15" rotary lobe bowers w/silencers
- 30" fan w/20 hp/1760 RPM motor
- 4" diameter x20' long neck cyclone w/rotary airlock
|
|
SAW & KNIFE SHARPENING
|
- NEWMAN G280 rotary tub knife grinder, s/n: 280343
- WRIGHT W-150HD-B circular saw face grinder, s/n: C3606
- ACME BSA1100 circular saw sharpener s/n:10456
|
|
SILOS, TANKS, HOPPERS, BINS
|
- (5) 1994 PEABODY Tectank 12' dia x 42' high, 3540 cu. ft. all steel funnel bottom cement silos
- 1994 10,000 gallon 3/16" steel wall insulated sodium silicate tank
- 10,000 gallon poly aluminum sulfate tank
- 8' x 18' x 6' high live bottom hopper w/3-auger clean out, 205:1 ratio gearheads
- 12' live bottom hopper w/2-auger clean out (2) EURODRIVE 7-1/2 HP/25 rpm gearheads
- 8'x12' x 12' high steel bolt together refined fiber bin w/6-auger clean out, cyclone, EURODRIVE gearheads
|
|
DRY MIX STATION
|
- ERICH DZ29 3000 liter dry mixer w/(2) sand mixers
- (2) BISON electronic scale cyclones, 40" dia x 80", s/n:648014
- 5'x9' x 5-1/2' fiber scale bin w/12' twin auger clean out
- (2) 6' x 6' x 5' cement/fly ash receiving bins w/13' twin auger clean outs
- 2-1/2' x 7-1/2' x 4' reclaim hopper w/14' auger clean out
- 12' mixer clean out w/(4) 12" diameter x12' augers, EURODRIVE 5 hp/17 rpm gearheads
- (5) 287 liter dry chemical vessels
|
|
CLEANING STATION
|
- Caul plate cleaning station w/(2) 134" 5 hp top motorized brushes, feed thru transfer exhaust manifold
- Cleaning station w/54", 5 hp top motorized brush, in & out feed caul plate hold down rolls, exhaust blower
|
|
CONVEYORS
|
- (2) 24"x40' covered cleated troughing roll belt conveyor w/EURODRIVE 5/36 gearhead and EURODRIVE 7-1/2/39 gearhead
- 20"x50' covered cleated belt conveyor w/EURODRIVE gearhead
- 22"x45' overs troughing roll belt conveyor
- 24"x60' overs troughing roll belt conveyor
- 25"x150' dry mix troughing roll belt conveyor
- 30"x40' covered troughing roll belt conveyor
- 15"x50' cleated belt conveyor w/EURODRIVE
- 24"x50' cleated belt conveyor w/EURODRIVE
- (3) 31"x10' formerfill belt conveyors
|
|
TRANSFERS
|
- 300'+ 3-strand 6" belt transfer 60' 3-strand 6" belt transfer 7-1/2' 3-strand 8" belt transfer 5-1/2' 3-strand 6" belt transfer
|
|
AUGERS/ROLL CASES
|
- 50"x12' product roll over rollcase
- 47"x13' pop up rollcase
- 45"x140' caul plate rollcase
- (2) 12' rail-mounted caul plate transfer rollcases
|
|
PLUS
|
- DIEHL 5" cap straight line rip saw, 15 hp arbor motor
- CHEMETRONICS MICRO 1-EV spark detection system
- FLY ASH collection system w/cyclone, air locks, conveyors & collection hoppers
- T&S 4' x 6', 4000 lb hydraulic scissor lift
- MAC 8' x 40" diameter pressure vessels
- (2) CYKLOP RPM 200 strapping machines
- Spare motor inventory.
- Parts room shelving, miscellaneous mill parts & supplies, office equipment including desk, chairs, files, MONROE RL 735Z and KONICA 2020 copiers w/sorters, SOEHNLE 150 lb shipping scale, much more
|
|
TERMS & CONDITIONS
|
- 5% BUYERS PREMIUM
- PAYMENT: Full payment must be made by no later than 4 pm, April 7.
- A 25% deposit is required by the close of business, auction day. Cash, cashiers check, Master & Visa Cards only. Personal or Company checks accepted ONLY with bank letter of guarantee.
- Absentee bids accepted with 25% deposit
- REMOVAL: No purchase may be removed during the auction. Small purchases must be removed 1 hour after the sale or between 8 am & 4:30 pm Friday April 7 & Monday, April 10. Large equipment removal schedule to be announced on auction day.
- Announcements made by the auctioneer at the time of sale take precedence over printed matter.
- Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
-
- Washington Auctioneers License #48
|
|
DRIVER DIRECTIONS
|
- From I-5 in Red Bluff, take the South Main Street exit.
- Drive south on S. Main approximately 1.7 miles to Tyler Road.
- Turn left on Tyler and drive 3/10 mile to Reading Road.
- Turn right on Reading Road and drive 5/10 mile to the auction site, located on the left.
|
|
LODGING
|
| BEST INN & SUITES | 530-529-7060 |
| TRAVELODGE | 530-527-6020 |
| SUPER 8 | 530-527-8882 |
WATCH FOR AUCTION SIGNS
FOOD SERVICE AVAILABLE AT THE AUCTION SITE
|
|
Home | About Us | Auction Schedule | Mailing List | Map | Past Auctions
Registration Form | Advanced Bid Overview | Terms & Conditions
 Back to Top
James G. Murphy Co.
Commercial / Industrial / Real Estate Auctioneers
P.O. Box 82160 - 18226 - 68th Ave. N.E.
Kenmore, Washington 98028
(425) 486-1246 or Toll Free 1-800-426-3008
Fax: (425) 483-8247
Oregon address & phone:
105 McNary Estates Dr. N
Keizer, OR 97303
phone: (503) 463-4444
fax: (503) 463-1554
Copyright©2000 James G. Murphy Co.
All rights reserved worldwide
|
|
|
